Swimming Pool Regulations
Do you require a permit to for a swimming pool or spa?
Building approval must be obtained for the installation and set-up of pools and spas (as defined below). Before building a swimming pool or spa, inflating a blow-up pool or spa and/or erecting related safety fencing, you need to check with a building surveyor to find out if or what building approval is required. Plumbing approval may also be required.
The Building Code of Australia (BCA) defines a swimming pool as an excavation or structure that:
- is capable of being filled with water to a depth of 300 millimetres or more
- the maximum possible water surface is greater than 9 square metres
- is capable of being used for swimming, bathing, wading, paddling or other human aquatic activities
- is used, designed, manufactured or adapted for the purpose mentioned above, despite its current use
- includes spas and inflatable swimming pools
It does not include a:
- fish pond
- ornamental pond, manufactured to be used for ornamental purposes
- dam used for aquaculture, marine research or storage of water
- spa bath situated in a bathroom which is not continually filled with water
- birthing pool used solely for water births
- portable wading pool
A portable wading pool is defined as:
- capable of being filled with water to a depth of less than 300 millimetres; and
- has a volume of no more than 2,000 litres; and
- has no filtration or pumping system
Above-ground swimming pools and spas are required to have permanent safety barriers in the same manner as in-ground pools and spas, however, the walls of an above-ground swimming pool or spa may provide a barrier if they are at least 1.2m in height and so not have a surface which enables a child to gain a foothold and climb into the swimming pool or spa. Any objects that could be climbable by a young child, such as a pool ladder, pool filter, pump equipment or plumbing connection into the side of the pool, should be properly fenced or otherwise isolated.
Fencing regulations state that:
- Fences must be a minimum of 1.2m high
- The gap under the fence to be a maximum of 100mm from the ground
- The vertical bars should be closer than 100mm apart
- Once a fence and self-closing gate are installed, they must be kept in good working order
The placing of a cover or lid over the swimming pool or spa DOES NOT comply and is not acceptable. A safety barrier is required.
For more information click here(PDF, 468KB).